Bollard Control

First published 23rd Jul, 2024

Bollard remains in “normal operation” and individual vehicles are swiped through by an authorised proximity card holder.

  • Steward is positioned at the indicator column on the right-hand side of the bridge
  • Entering vehicles proceeds towards the steward.
  • Steward identifies driver, briefs them on key site information and give directions.
  • Steward presents proximity card to card reader.
  • Driver looks for green light on indicator column.
  • Vehicle proceeds into park.
  • Only One Vehicle’ can proceed each time the card is presented
  • Drivers must NOT follow the vehicle in front.
  • The bollard will quickly come up after one vehicle has cleared the system.
  • No tail gating is permitted.
  • Failure to comply may result in damage to vehicle.

key site information:

  • Obey the 5mph speed limits
  • Hazard warning lights to be switched on
  • Keep to designated roadways
  • Do not travel onto grass areas/verges
  • Do not cut corners Bollard Entry:
  • Drivers must NOT follow the vehicle in front
  • No tail gating is permitted

Exit:

  • Divers approach indicator column slowly (giving way to pedestrians and cyclists).
  • Bollard will lower automatically.
  • Wait for the green light.
  • Left turn only to exit the park.
  • Failure to comply may result in damage to vehicle.



For more detailed information on use of the bollard operation system check the link in your Conditions of Hire Letter  

All event guidance